Feb 23, 2013  The DIR-655 Quick Router Setup Wizard CD 'download the CD here' should be among THE easiest things to locate.and it and sometimes other information is not. A LOT of the main D-Link website is interesting, but much of it either does not work right, or there are some mighty problematic web-site faults in design/implementation.

• D-link Wireless Setup Wizard Download

Assuming you just purchased the router, open the package and remove the Wireless Router, A/C Adapter, and the Ethernet Cable. You can leave the CD inside the packaging, you won’t be needing that. Now before you start unhooking everything take just a second to identify what you have, and where you want to place the router. Your computer should either be connected directly to a Cable/DSL Modem, OR a switch which is plugged into the Modem. If your computer is plugged directly into the modem move to step 2, if not keep reading. If your switch is 5 ports or less you can remove it from the equation and just set it aside because the DIR-628 has 4 slots for hardwiring computers into the network. If you need more than those 4 slots just connect the router to the switch.

Computers without switches – Unplug the Ethernet cable going from the modem to the computer. Use the short Ethernet cable provided with the router to connect the router to the modem.

Use the cable going from your computer (the one you just unplugged) and insert that into either of the 1-4 switch ports on the wireless router. Finally give the modem power with the A/C adapter, Computers with switches of 5 ports or less – Completely remove old switch, and plug everything into the wireless router. Make note that the Ethernet cable coming directly from the cable/dsl modem must be pluged into the Ethernet slot on the router and not one of the switch ports. Computers with pre-existing wireless routers – match port for port. This takes you to a new page, that we do not have a screenshot of. First, you need to change the default Wireless Network Name to one of your choosing.

This is the name you give your network so that you can find it again later. To learn more about this topic,reaf our best wireless routers 2017. You can also change the Wireless Channel.

To do this, you need to uncheck the box that reads Enable Auto Channel Scan. Then in the Wireless Channel box, choose from the channels of 1,6, and 11. These are the only channels you should be using. To learn more about these three channels, read our guide by clicking this.

D link router doesn't require any software CD. Type 192.168.1.1 in the address bar (make sure the router is connected) then new page opens now give user id and password as 'admin' then log in. Select set up menu-create new connection- Fill up the form give vpi = 0, vci = 35 and give correct user id and password given by service provider and select the connection type as PPoE apply. Now select tools-system commands-save all. Then on same window select restart. Now yours router is configured.

Now u can use the Internet. If this does not work than visit d-link support and they will help fixing it visit and let me know if you need any help. For setting up all type of wifi routers without using cds following steps to be followed:- 1. Set u all the possible wiring between modem and the router/ B/w the router and the pc incase of modemwith intergrated wifi.

D-link Wireless Setup Wizard Download

2.switch it on. 3.now open the internet browser(chrome,opera,explorer etc.) 4. Type the default gateway address descripted at the back of your router (generally 192.168.0.1/192.168.1.1/192. Something);in the address bar of your browser and press enter. 5.now the popup message will ask for username and password.

Generally usname and pass. Are both to be written admin. Now the default page of the router will get opened. Now run the quick setup and follow the further instuctions.

Each inormation should be entered properly and ur wifi router will start working. Thanks for reading. If any addition help is required email me on sukhs094@gmail.com. I'm sorry that the instructions weren't quite simple enough. My goal was to make the instructable easy enough that a person with little to no computer experience could understand and follow theses yet have enough information to appeal to more experienced computer users. If you have any suggestions on improving on my instructable to help achieve my goal is like to hear them. I'm glad you where able to get your router setup and it's good to know their tech support actually cares about there customers.